2017 Honda Civic Oil Filter Number – Your Definitive Guide

Ever stared at a shelf full of oil filters, wondering which one is the perfect match for your trusty 2017 Honda Civic? You’re not alone. Getting the right 2017 Honda Civic oil filter number is crucial for maintaining your engine’s health and ensuring peak performance. A simple oil change can become a headache if you grab the wrong part, leading to leaks, poor filtration, or even engine damage.

At FatBoysOffroad, we understand the satisfaction of a job well done in your garage. That’s why we’re here to cut through the confusion and equip you with everything you need to know. This comprehensive guide will not only reveal the exact filter numbers but also walk you through the types, brands, and best practices for your 2017 Civic.

By the end of this article, you’ll be a pro at selecting the right filter and confidently tackling your next oil change. We’ll cover everything from the benefits of specific filters to common problems and sustainable choices. Get ready to give your Civic the care it deserves!

What is the 2017 Honda Civic Oil Filter Number?

Let’s get straight to the point. Knowing the precise 2017 Honda Civic oil filter number is your first step towards proper maintenance. Honda uses specific part numbers for their Genuine Honda filters, which are engineered to meet the exact specifications of your engine.

For most 2017 Honda Civic models (including the 1.5L Turbo and 2.0L naturally aspirated engines), the primary OEM (Original Equipment Manufacturer) oil filter part number you’ll be looking for is:

  • Honda Part Number: 15400-PLM-A02

This filter is designed for optimal fit, filtration efficiency, and oil flow. Always double-check your owner’s manual or consult a Honda dealership parts department with your VIN to confirm the exact number for your specific trim and engine variant. This is a critical step for ensuring you have the right part.

OEM Honda Filter Numbers: Why They Matter

Using a Genuine Honda oil filter ensures that your engine receives the protection it was designed for. These filters are built to Honda’s rigorous quality standards.

  • They provide excellent filtration, trapping harmful contaminants.
  • They maintain proper oil pressure and flow to all engine components.
  • The internal bypass valve is calibrated specifically for your Civic’s engine.

While often a bit more expensive, the peace of mind and long-term engine health benefits are well worth it. Think of it as investing in your Civic’s future.

Aftermarket Equivalents: Your Options Beyond OEM

Many reputable aftermarket manufacturers produce high-quality oil filters that are excellent alternatives to the OEM Honda part. These filters are designed to meet or exceed OEM specifications.

When searching for aftermarket options for your 2017 Honda Civic oil filter number, you’ll typically find filters that cross-reference to the Honda 15400-PLM-A02. Some popular and reliable aftermarket brands include:

  • Wix Filters: Often known for their robust construction and excellent filtration.
  • Mann-Filter: A German brand known for its precision engineering.
  • Mobil 1 Extended Performance: Great for synthetic oils and longer drain intervals.
  • PurolatorONE/PureONE: Offers good filtration and build quality.
  • Fram Tough Guard/Ultra Synthetic: Provides reliable performance, especially the higher-end lines.

When selecting an aftermarket filter, always verify it’s compatible with your 2017 Honda Civic. Check the manufacturer’s catalog or a reliable parts store’s database using your vehicle’s make, model, and year. This ensures a perfect fit and proper function.

Understanding Oil Filter Types for Your 2017 Civic

Beyond just the part number, understanding the different types of oil filters available can help you make an informed decision. Each type offers varying levels of filtration and durability, impacting the benefits you get from your oil change.

For your 2017 Honda Civic oil filter number, you’ll primarily encounter filters categorized by their media material. Choosing the right one can extend your engine’s life and improve oil longevity.

Standard Cellulose Filters

These are the most common and economical oil filters. They use a paper-like cellulose media to trap contaminants.

  • Pros: Affordable, effective for conventional oil, good for standard drain intervals (3,000-5,000 miles).
  • Cons: Can restrict flow more as they get dirty, less efficient for very fine particles compared to synthetic.

They are a solid choice for routine maintenance if you stick to conventional oil and regular change intervals. Many OEM filters fall into this category, but with Honda’s specific quality.

Synthetic Blend Filters

These filters combine cellulose and synthetic fibers in their media. They offer a step up in performance from standard filters.

  • Pros: Better filtration efficiency, improved durability, suitable for synthetic blend oils and slightly extended drain intervals (5,000-7,500 miles).
  • Cons: Slightly more expensive than pure cellulose filters.

If you’re using a synthetic blend motor oil, matching it with a synthetic blend filter is a smart move. It’s one of the excellent 2017 Honda Civic oil filter number tips for balanced performance.

Full Synthetic Filters

These filters utilize a fully synthetic media, often fiberglass or micro-glass, designed for maximum efficiency and durability. They are the top-tier option.

  • Pros: Superior filtration, excellent flow rates, ideal for full synthetic oils and extended drain intervals (7,500-15,000+ miles). They maintain efficiency longer.
  • Cons: Highest cost among filter types.

For off-roaders, those who tow, or anyone seeking the ultimate protection and longest possible oil change intervals, a full synthetic filter is highly recommended. It complements the benefits of full synthetic motor oil perfectly.

Choosing the Right Oil Filter Brand: Quality & Performance

When you’re looking for a 2017 Honda Civic oil filter number, the brand matters. Not all filters are created equal, and choosing a reputable brand ensures quality construction and reliable performance.

Read More:  Honda Power Steering Fluid Equivalent – The Definitive DIY Guide

We’ve already mentioned some top aftermarket names, but let’s dive a bit deeper into what makes a good oil filter and which brands consistently deliver.

Top Recommended Brands for Your Civic

Beyond the OEM Honda filter, these brands consistently receive high marks from mechanics and enthusiasts alike:

  • Wix Filters: Praised for their robust construction, anti-drain back valve quality, and consistent filtration. A go-to for many DIYers.
  • Mann-Filter: Often found as OEM on European cars, their quality is top-notch and they offer excellent filtration for your Civic.
  • Mobil 1 Extended Performance: Specifically designed for use with synthetic oils and extended drain intervals. If you use Mobil 1 synthetic oil, this is a perfect pairing.
  • PurolatorBOSS or PurolatorONE: Purolator offers good value and performance. The BOSS line is their premium synthetic option.
  • K&N Performance Gold: Features a robust casing and a nut welded to the end for easy removal, a great benefit for DIY mechanics.

Always prioritize quality over the lowest price when it comes to oil filters. A cheap filter can compromise your engine’s health, negating any savings.

What to Look For in a Quality Filter

When you’re comparing filters for your 2017 Honda Civic oil filter number, keep these key features in mind:

  • Robust Casing: A strong, durable metal casing prevents damage and leaks.
  • High-Quality Filter Media: Look for dense, uniform pleats that maximize filtration surface area.
  • Efficient Anti-Drain Back Valve (ADB Valve): This rubber or silicone valve prevents oil from draining out of the filter when the engine is off. A good ADB valve ensures instant oil pressure upon startup, protecting your engine from dry starts.
  • Sturdy Center Tube: Prevents the filter media from collapsing under pressure.
  • Proper Bypass Valve: This valve opens if the filter becomes clogged, allowing unfiltered oil to reach the engine. It’s a last resort, but crucial for preventing oil starvation.
  • Correct Gasket: A high-quality, pliable gasket ensures a tight seal against the engine block.

These elements contribute to the overall performance and reliability of the filter. Don’t underestimate their importance!

DIY Oil Change: Step-by-Step for Your 2017 Honda Civic

Changing your own oil and filter is one of the most satisfying and cost-effective maintenance tasks you can do. With the right 2017 Honda Civic oil filter number and a few tools, you can easily perform this service.

This section provides a clear, actionable guide for weekend DIYers and off-road enthusiasts alike. Remember, safety is paramount!

Tools and Supplies You’ll Need

Before you begin, gather everything you need:

  • New oil filter (the correct 2017 Honda Civic oil filter number, e.g., Honda 15400-PLM-A02 or equivalent).
  • Engine oil (check your owner’s manual for the correct type and viscosity, typically 0W-20 for the 2017 Civic).
  • Oil drain pan (large enough to hold 5-6 quarts).
  • Socket wrench and appropriate socket for the drain plug (usually 17mm).
  • Oil filter wrench (cap-style or strap-style, matching your filter size).
  • New drain plug crush washer (essential for preventing leaks, typically 14mm).
  • Funnel.
  • Rags or shop towels.
  • Gloves (nitrile or similar).
  • Jack and jack stands (or car ramps).
  • Safety glasses.

Safety First!

Working under a car can be dangerous. Always prioritize safety:

  • Park your Civic on a level, firm surface.
  • Engage the parking brake.
  • Use jack stands if you’re lifting the car with a jack. Never rely solely on a jack.
  • Allow the engine to cool down for at least 15-30 minutes before starting. Hot oil can cause severe burns.
  • Wear safety glasses and gloves to protect your eyes and hands.

These precautions are non-negotiable. Your safety is worth the extra few minutes of setup.

The Step-by-Step Process

  1. Prepare the Vehicle: Drive your Civic for 5-10 minutes to warm the oil slightly (this helps it drain better). Park, engage the parking brake, and safely lift the front of the car using a jack and secure it with jack stands, or drive it onto ramps.
  2. Locate Drain Plug and Filter: Place your oil drain pan directly under the oil pan drain plug. The oil filter is usually nearby. For the 2017 Civic, the oil filter is often easily accessible from underneath the front of the car, near the passenger side.
  3. Drain the Oil: Using your socket wrench, carefully loosen and remove the drain plug. Be prepared for oil to flow out immediately. Let it drain completely, which can take 10-15 minutes.
  4. Replace Crush Washer: While the oil drains, remove the old crush washer from the drain plug. Install the new crush washer. This is a critical step for a leak-free seal.
  5. Reinstall Drain Plug: Once the oil has finished draining, clean the area around the drain plug opening. Reinstall the drain plug with the new crush washer. Torque it to the manufacturer’s specification (usually around 29 lb-ft for Honda, but check your manual). Do not overtighten!
  6. Remove Old Oil Filter: Position your drain pan under the oil filter. Use your oil filter wrench to loosen the old filter. Once loose, carefully unscrew it by hand. Be ready for a small amount of oil to spill out.
  7. Prepare New Oil Filter: Take your new 2017 Honda Civic oil filter number (e.g., 15400-PLM-A02). Apply a thin film of fresh engine oil to the rubber gasket of the new filter. This helps create a good seal and makes future removal easier.
  8. Install New Oil Filter: Screw the new filter onto the engine by hand until the gasket makes contact with the engine block. Then, tighten it an additional 3/4 to 1 full turn by hand. Some manufacturers specify torque, but hand-tight plus 3/4 turn is a common and effective method. Do not overtighten with a wrench!
  9. Add New Oil: Lower your Civic off the jack stands. Open the hood and locate the engine oil fill cap. Place a funnel in the opening and slowly pour in the recommended amount of new engine oil (check your owner’s manual for capacity, typically around 3.7 quarts for the 1.5L and 4.2 quarts for the 2.0L).
  10. Check Oil Level: Replace the oil fill cap. Start the engine and let it run for a minute or two to circulate the new oil. Turn off the engine and wait a few minutes for the oil to settle. Check the oil level on the dipstick. Add more oil if needed until it reaches the “full” mark.
  11. Inspect for Leaks: Carefully inspect around the drain plug and oil filter for any signs of leaks. Address any leaks immediately.
Read More:  2005 Honda Accord Spark Plug Replacement – A DIY Guide To Restoring

Congratulations, you’ve successfully changed your oil and filter! This “how to 2017 Honda Civic oil filter number” guide should make the process smooth.

Disposal of Old Oil and Filter

Proper disposal of used motor oil and filters is crucial for environmental protection. Never pour used oil down the drain or into the ground.

  • Most auto parts stores and quick lube shops accept used motor oil for recycling, often free of charge.
  • The old oil filter can also be recycled at many of these locations. Drain as much oil as possible from the filter before taking it in.

This is part of being a responsible DIY mechanic and contributes to sustainable practices.

Sustainable & Eco-Friendly Oil Filter Choices

As car owners and off-road enthusiasts, we care about the environment. Making sustainable choices for your 2017 Honda Civic oil filter number can reduce your ecological footprint.

While traditional filters are mostly metal and paper, advancements are being made to offer more eco-friendly alternatives.

Recyclable Filters and Materials

Some manufacturers are developing filters with more recyclable components or designs that reduce waste. Look for filters that:

  • Use less plastic: Many modern filters are cartridge-style, meaning you only replace the filter media, not the entire metal canister. While the 2017 Civic typically uses a spin-on filter, some vehicles are moving towards cartridge designs.
  • Are easier to separate: Filters made with materials that are easier to separate for recycling can be a better choice.

Even with standard spin-on filters, proper draining and recycling at designated facilities is the most impactful eco-friendly action you can take.

Extended Drain Interval Filters

Using a high-quality, full synthetic oil filter (like those discussed earlier) allows for extended oil change intervals. This is a significant eco-friendly benefit:

  • Less Waste: Fewer oil changes mean fewer used filters and less waste oil generated over the vehicle’s lifespan.
  • Resource Conservation: Less frequent changes conserve the resources involved in manufacturing and transporting oil and filters.

Pairing a premium synthetic filter with a full synthetic oil is one of the best sustainable 2017 Honda Civic oil filter number choices you can make. Always follow the manufacturer’s recommendations for extended intervals and monitor your oil condition.

Common Problems and Troubleshooting Your Oil Filter

Even with the correct 2017 Honda Civic oil filter number and careful installation, issues can sometimes arise. Knowing how to identify and troubleshoot these common problems can save you time and prevent costly damage.

Being prepared for potential hiccups is part of the “2017 Honda Civic oil filter number care guide” philosophy.

Leaking Filter

A leaking oil filter is the most common problem after an oil change. It usually manifests as a puddle of oil under your car.

  • Cause 1: Overtightened Filter: Crushes the gasket, leading to a poor seal.
  • Cause 2: Undertightened Filter: Gasket doesn’t compress enough for a proper seal.
  • Cause 3: Old Gasket Still on Engine: The old filter’s gasket stuck to the engine block, creating a double gasket with the new filter. This is a major cause of leaks.
  • Cause 4: Damaged Gasket: The new filter’s gasket was torn or nicked during installation.

Troubleshooting: Always ensure the old gasket is removed. Hand-tighten the new filter, then give it an additional 3/4 to 1 full turn. Check for leaks immediately after starting the engine. If leaking, remove the filter, check for double gaskets, inspect the new gasket, and reinstall carefully.

Incorrect Filter Size

Using the wrong 2017 Honda Civic oil filter number can lead to serious problems, even if it seems to fit.

  • Cause: Grabbing the wrong filter at the parts store, or relying on outdated information.

Troubleshooting: An incorrect filter might not seal properly, leading to leaks, or it might restrict oil flow, causing oil pressure issues. Always double-check the part number against your owner’s manual or a reliable cross-reference guide before installation. If you suspect the wrong filter was installed, replace it immediately with the correct one.

Oil Pressure Issues

While less common, a faulty or incorrect oil filter can contribute to oil pressure problems, which can be detrimental to your engine.

  • Cause 1: Clogged Filter: A filter that’s been in too long or is of poor quality can restrict oil flow.
  • Cause 2: Faulty Bypass Valve: If the filter’s internal bypass valve is stuck open, oil may bypass the filter entirely, leading to poor filtration. If it’s stuck closed, oil flow can be restricted.
  • Cause 3: Incorrectly Sized Filter: A filter that’s too small can restrict flow, while one that’s too large might not seal correctly.
Read More:  2005 Honda Civic Oil Change – The Ultimate DIY Guide For Peak

Troubleshooting: If your oil pressure warning light comes on after an oil change, stop the engine immediately. Check your oil level. If the level is good, the filter could be the culprit. Replace the filter with a known good, correct OEM or reputable aftermarket part. If the problem persists, consult a professional mechanic promptly.

Extending Oil Filter Life and Best Practices

To get the most out of your oil filter and ensure your 2017 Honda Civic runs smoothly, follow these best practices. These 2017 Honda Civic oil filter number tips go beyond just the change itself.

  • Match Filter to Oil: Use a standard filter with conventional oil, a synthetic blend filter with synthetic blend oil, and a full synthetic filter with full synthetic oil. This synergy maximizes the life and performance of both components.
  • Follow Manufacturer’s Schedule: Adhere to Honda’s recommended oil and filter change intervals. For severe driving conditions (heavy towing, extreme temperatures, dusty environments, frequent short trips), consider more frequent changes.
  • Monitor Oil Level Regularly: Check your oil level at least once a month. Low oil levels can put extra strain on the filter and the engine.
  • Don’t Skimp on Quality: Always use a high-quality filter from a reputable brand. A cheap filter might save a few bucks now but can cost you much more in engine repairs down the road.
  • Proper Torque: When installing the drain plug, use a torque wrench to ensure it’s tightened to specification. For the oil filter, follow the manufacturer’s instructions, typically hand-tight plus 3/4 to 1 full turn.
  • Keep Records: Maintain a log of your oil changes, including the date, mileage, and type of oil and filter used. This helps you stay on schedule and track your vehicle’s maintenance history.

These best practices ensure your 2017 Honda Civic oil filter number selection and installation contribute to long-term engine health.

Frequently Asked Questions About 2017 Honda Civic Oil Filters

What is the recommended oil type for a 2017 Honda Civic?

For most 2017 Honda Civic models, Honda recommends using 0W-20 full synthetic motor oil. Always check your owner’s manual for the precise recommendation for your specific engine and climate.

Can I use an extended life oil filter with conventional oil?

While you can, it’s generally not recommended. Extended life filters are designed to work best with synthetic oils, which themselves have a longer lifespan. Using a high-performance filter with conventional oil won’t extend the oil’s life, so you won’t get the full benefits.

How often should I change the oil filter on my 2017 Honda Civic?

It’s best practice to change your oil filter every time you change your engine oil. This ensures that the new, clean oil isn’t immediately contaminated by an old, dirty filter. Follow your Honda’s maintenance minder system or the recommended mileage/time interval in your owner’s manual.

What happens if I don’t change my oil filter?

If you don’t change your oil filter, it will eventually become clogged with contaminants. A clogged filter will force the oil to bypass the filter media, meaning unfiltered oil will circulate through your engine. This can lead to increased engine wear, reduced engine lifespan, and potential engine damage over time.

Is there a difference in oil filters for the 1.5L Turbo vs. 2.0L engine in the 2017 Civic?

No, typically both the 1.5L turbocharged and 2.0L naturally aspirated engines in the 2017 Honda Civic use the same oil filter (Honda Part Number 15400-PLM-A02 or equivalent). However, it’s always wise to confirm with your owner’s manual or a reputable parts source using your VIN.

Conclusion: Empowering Your Civic’s Engine Health

You’ve now got the full rundown on the 2017 Honda Civic oil filter number and everything that goes into choosing the right one and performing a successful oil change. From understanding OEM specifics to navigating aftermarket options and tackling the DIY process, you’re equipped with expert-level knowledge.

Remember, regular oil and filter changes are the lifeblood of your engine. Investing in quality parts and following best practices will ensure your 2017 Honda Civic continues to deliver reliable performance for years to come, whether you’re cruising city streets or hitting a dirt trail.

Don’t let a simple maintenance task intimidate you. With this guide, you have the confidence to keep your Civic running strong and clean. Stay safe, keep wrenching, and happy trails!

Thomas Corle
Scroll to Top