2023 Can Am Renegade 70 Oil Capacity – Your Complete DIY Oil Change

So, you’ve got a 2023 Can-Am Renegade 70, the perfect machine for getting the next generation of riders hooked on the off-road life. You know that keeping this little beast running strong means staying on top of maintenance.

You agree that even a “simple” job like an oil change can feel a bit daunting if you don’t have the right specs. Guessing how much oil to add can lead to some serious, wallet-draining problems down the trail.

We promise this guide will eliminate all the guesswork. We’re going to give you the exact 2023 can am renegade 70 oil capacity, walk you through the entire process step-by-step, and share some pro tips to make the job clean, safe, and perfect every time.

In this article, you’ll get the definitive answer on oil capacity and type, a full tool list, a detailed walkthrough of the oil change process, and a guide to avoiding the most common mistakes. Let’s get those hands dirty!

The Exact 2023 Can Am Renegade 70 Oil Capacity & Recommended Oil

Before you even think about grabbing a wrench, you need to know the two most critical pieces of information: exactly how much oil to use and which type of oil will protect that little 70cc engine. Getting this wrong is not an option.

The Magic Number: How Much Oil to Use

The correct engine oil capacity for a 2023 Can-Am Renegade 70 is precise and smaller than you might think. Don’t just dump a full quart in there!

The official spec is:

0.6 L (0.63 US qt)

That’s it. A little over half a quart. This is why you never pour directly from a new bottle without measuring. The small size of this engine makes it extremely sensitive to being overfilled or underfilled.

Choosing the Right Oil: More Than Just Viscosity

Using the wrong type of oil is just as bad as using the wrong amount. Car oil is a huge no-go. Your ATV’s engine, transmission, and clutch share the same oil, and automotive oils contain friction modifiers that will destroy your clutch.

You need a high-quality 4-stroke ATV/motorcycle-specific oil. Here’s what to look for:

Recommended Viscosity: SAE 5W-40
BRP’s Recommendation: XPS 5W-40 Synthetic Blend 4-Stroke Oil is the factory choice.
Alternative Options: If you can’t find XPS, look for a reputable brand of 5W-40 synthetic or synthetic blend motorcycle/ATV oil that is rated API SL and, most importantly, JASO MA or JASO MA2. The JASO rating ensures it’s designed to work with wet clutches like the one in your Renegade.

Why Nailing the Oil Capacity is Non-Negotiable

You might be wondering, “What’s the big deal if I’m a little over or under?” On a small engine like this, a small error has big consequences. Understanding the benefits of 2023 can am renegade 70 oil capacity precision is key to a long engine life.

The Dangers of Underfilling

This one is pretty obvious, but the effects happen fast. Not enough oil means the oil pump can’t circulate it effectively to all the critical moving parts—the piston, crankshaft, and transmission gears.

This leads to metal-on-metal contact, extreme heat buildup, and ultimately, catastrophic engine failure. It’s a quick way to turn a fun toy into a very expensive paperweight.

The Hidden Problems of Overfilling

Many DIYers think adding a “little extra for good measure” is a good idea. It’s not. In fact, it can be just as damaging as underfilling.

When the crankcase is too full, the spinning crankshaft whips the oil into a frothy, foamy mess. This aerated oil is full of air bubbles and cannot lubricate properly. This leads to:

Increased Engine Pressure: The excess oil has nowhere to go, putting immense pressure on seals and gaskets, causing them to fail and leak.
Loss of Power: The engine has to work much harder to move through the thick, overfilled oil, robbing the ATV of performance.
Overheating: Foamy oil can’t transfer heat away from engine components effectively, leading to overheating and damage.

Tools & Supplies: Your Pre-Flight Checklist

A smooth job starts with having everything you need within arm’s reach. Scrambling to find a tool mid-drain is how spills happen. Here’s your complete checklist for this 2023 can am renegade 70 oil capacity guide.

Essential Tools

Ratchet Wrench: A standard 3/8″ drive will do.
Metric Socket Set: You’ll need the correct size for the drain plug (typically 17mm on many Can-Ams, but always verify on your specific machine to avoid stripping).
Torque Wrench (Highly Recommended): This is the best way to avoid over-tightening and stripping the aluminum threads of the engine case. It’s a smart investment.
Wide-Mouth Funnel: A clean funnel is essential for a spill-free refill.
Oil Drain Pan: Get one larger than you think you need. A 2-gallon pan is more than enough and contains any splashes.
Lint-Free Rags or Shop Towels: For cleaning the drain plug, engine case, and any minor drips.

Required Supplies

Engine Oil: At least 1 US quart of the correct 5W-40 JASO MA 4-stroke oil.
New Drain Plug Crush Washer: Do not reuse the old one! A new washer is critical for a leak-free seal. You can get these from your Can-Am dealer or an auto parts store.
Nitrile Gloves: Keep your hands clean and free of used oil.
Oil Measuring Cup: A simple measuring cup with liter or quart markings helps you pour the exact amount.

Step-by-Step: How to Perform a Perfect 2023 Can Am Renegade 70 Oil Change

Alright, you’ve got your specs and your gear. Now for the fun part. This section details how to 2023 can am renegade 70 oil capacity is properly managed during an oil change. Follow these steps on a level surface for a flawless result.

Warm Up the Engine
Start the ATV and let it idle for 2-3 minutes. Don’t take it for a rip; you just want to warm the oil slightly. Warm oil flows out much faster and carries more suspended contaminants with it. Do not perform this on a hot engine, as you risk serious burns.
Prep for Draining
Turn off the engine. Locate the oil fill cap/dipstick (usually on the right side of the engine) and loosen it slightly to help the oil drain smoothly. Now, find the drain plug on the bottom of the engine crankcase.
Position the Pan and Remove the Plug
Slide your oil drain pan directly under the drain plug. Using your ratchet and the correct size socket, turn the drain plug counter-clockwise to loosen it. For the last few turns, unthread it by hand to control its removal and avoid dropping it into the hot oil.
Let It Drain Completely
Let the old oil drain for at least 10-15 minutes. This is a good time to clean the magnetic tip of your drain plug, which will likely have some fine metallic fuzz on it—this is normal. Wipe it perfectly clean with a rag.
Reinstall the Drain Plug
Once the oil has slowed to a very slow drip, wipe the drain plug opening on the engine case clean. Slide the new crush washer onto your clean drain plug. Thread it back into the engine by hand to ensure it’s not cross-threaded. This is a critical step!

Tighten the plug. If using a torque wrench, tighten to the spec in your owner’s manual (typically around 15 ft-lbs or 20 Nm for plugs of this size). If you don’t have one, tighten it until it is snug, then give it a final 1/8 to 1/4 turn. Do not overtighten.
Refill with Fresh Oil
Place your clean funnel into the oil fill hole. Now, carefully measure and pour in about 0.5 L of fresh oil. We start with slightly less than the full amount to avoid overfilling.
The Correct Way to Check the Oil Level
This is one of the most common problems with 2023 can am renegade 70 oil capacity checks. Remove the dipstick and wipe it clean. Re-insert the dipstick but do not screw it in. Let it rest on the threads of the opening, then pull it out to check the level. The oil should be between the upper and lower marks.
Top Off and Final Check
Slowly add a small amount of oil until the level reaches the full mark on the dipstick (when resting on the threads). Reinstall the dipstick cap and tighten it securely. Start the engine and let it run for 30 seconds to circulate the new oil, then shut it off. Wait a minute for the oil to settle, and perform one final check to confirm the level is perfect.

Common Problems with 2023 Can Am Renegade 70 Oil Capacity and How to Avoid Them

Even a simple job has pitfalls. Here are some of the most common issues we see at the shop and how you can sidestep them by following these 2023 can am renegade 70 oil capacity best practices.

“I Stripped the Drain Plug!”

This is the most feared DIY mistake. It’s almost always caused by over-tightening. The engine case is aluminum, and the drain plug is steel—the steel will always win, stripping the softer aluminum threads. The best prevention is a torque wrench. The second-best is developing a feel for “snug” and not using brute force.

“My Dipstick Reading is Inconsistent!”

This happens for two reasons: the ATV isn’t on perfectly level ground, or you’re screwing the dipstick in to check the level. Always check on a flat surface, and remember the Can-Am procedure: rest the cap on the threads, do not screw it in.

“I Reused the Crush Washer and Now It Leaks.”

We can’t say it enough: always use a new crush washer. They are single-use items. The soft metal deforms when tightened to create a perfect seal. Reusing a compressed washer will almost guarantee a slow, annoying oil drip.

A Sustainable and Eco-Friendly 2023 Can Am Renegade 70 Oil Capacity Care Guide

Being a responsible off-roader means taking care of the trails and our environment. This sustainable 2023 can am renegade 70 oil capacity guide ensures your maintenance doesn’t harm the planet.

Proper Used Oil Disposal

Never, ever dump used motor oil on the ground, in a drain, or in your trash. It is highly toxic. Pour the old oil from your drain pan into the empty oil bottle or a dedicated container.

Nearly all auto parts stores (like AutoZone, O’Reilly, etc.) and many local recycling centers will accept used motor oil for free. It’s an easy and responsible final step to the job.

Minimizing Waste and Spills

An eco-friendly 2023 can am renegade 70 oil capacity change is a clean one. Use a large drain pan to catch any splashes. If a spill does happen, clean it up immediately with an absorbent material like cat litter rather than hosing it away. Using high-quality oil also ensures better engine protection, potentially extending the time between changes as per your owner’s manual, which reduces waste over time.

Frequently Asked Questions About the Renegade 70 Oil Change

How often should I change the oil on a 2023 Renegade 70?

Always follow the maintenance schedule in your Can-Am owner’s manual. Generally, the first oil change is crucial after the initial break-in period (around 10-15 hours). After that, a common interval is every 6 months or every 50 hours of use, whichever comes first.

Can I use regular car oil in my Renegade 70?

Absolutely not. As we mentioned, most modern car oils contain friction-modifying additives designed for fuel economy. These additives will cause the wet clutch in your ATV’s transmission to slip and eventually fail, leading to a costly repair. Only use oil with a JASO MA or MA2 rating.

What is the drain plug torque spec for the Renegade 70?

While specs can vary slightly, a common torque value for this type of drain plug is around 15-17 ft-lbs (20-23 Nm). However, we strongly advise you to verify the exact specification in your official Can-Am service manual for your specific model year.

You’ve done it. You now have all the knowledge needed to confidently service your 2023 Can-Am Renegade 70. By understanding the precise oil capacity, using the right type of oil, and following the correct procedures, you’re ensuring that little quad will provide safe, reliable fun for countless adventures.

Remember the key takeaways: 0.6 L (0.63 US qt), use 5W-40 JASO MA oil, check the level without screwing in the dipstick, and always use a new crush washer. Now get out there, do the job right, and keep the ride going!

Author
Recent Posts

Thomas Corle

Founder & Automobile expert at FatBoysOffroad

Automobile expert and off-road enthusiast, sharing in-depth knowledge of vehicles, gear, and adventures. Helping readers make smart decisions and enjoy the thrill of off-roading safely and confidently.