Bobcat Warning Light Symbols Meaning (The 360 Guidelines)

Are you excited to ride your new Bobcat? But the warning symbols in the dashboard are confusing you.

Well, the Bobcat warning light symbols meaning is you need to take precautions for each malfunction.

In general, green or blue lights indicate that a system is on or operating. Orange or yellow warning lights indicate that the vehicle needs to be serviced or repaired soon. Red lights indicate that immediate action is required.

So, do you want to learn the meanings of each symbol? Follow the article till the end and get fully educated! 

Common Hydraulic Oil Bobcat Warning Light Symbols

Warning light symbols in a vehicle, including those for a Bobcat (a brand of construction and agricultural equipment), can vary depending on the specific model and year of manufacture.

Keep in mind that it’s crucial to refer to the equipment’s manual for accurate information specific to your model. Here are some common symbols:

  • Engine Oil Pressure Warning Light: Indicates low engine oil pressure. Stop the equipment immediately and check the oil level.
  • Coolant Temperature Warning Light: Alerts you to high engine coolant temperature. Turn off the equipment and let it cool down.
  • Battery Warning Light: This indicates a problem with the charging system. Check the battery and charging system.
  • Hydraulic System Warning Light: Alerts to an issue with the hydraulic system. Check hydraulic fluid levels and inspect for leaks.
  • Fuel Level Warning Light: Indicates low fuel levels. Refuel as soon as possible.
  • Air Filter Restriction Warning Light: Notifies you that the air filter is clogged and needs attention.
  • Transmission Temperature Warning Light: Alerts to high transmission fluid temperature. Allow the equipment to cool down.
  • Brake System Warning Light: This indicates a problem with the brake system. Stop the equipment and inspect the brakes.
  • Seat Belt Warning Light: Reminds the operator to fasten their seat belt for safety.
  • Glow Plug Indicator (for diesel engines): Illuminates during the preheating process before starting a diesel engine.
  • Parking Brake Warning Light: Indicates that the parking brake is engaged. Release the parking brake before operating.
  • Service Indicator Light: Alerts you that routine maintenance is due. Consult the equipment’s manual for details.

Bobcat Warning Light Symbols Meaning: Full Explanation

Before we get into the details, here’s a glimpse of the bobcat instrument panel symbols with their meaning:

Warning Light Function Meaning
Advanced Hands Control (ACS) Problem with the Advanced Hands Control feature.
Attachment Control Device (ACD) Error with Attachment Control Device.
General Warning Malfunctioning engines or hydraulic functions.

Extremely high engine speed.

The engine will shut down within 10 seconds due to high speed. 

Fuel Level Error in fuel level sender system.

Low fuel levels.

Glow Plugs Energized glow plugs.

3 beeps indicate an error in glow plugs.

System Voltage  Low, high, or extremely high levels of system voltage.
Seat Belt A reminder to wear the seat belt. The light stays on for 45 seconds.
Engine Oil Pressure 3 beeps refer to low engine oil levels or engine oil pressure sender is out of range. 

Continuous light indicates engine shutdown in 10 seconds for having low engine oil. 

Hydrostatic Charge Pressure The Hydraulic Oil pressure sender isn’t working.

Hydraulic Oil has a high temperature that needs immediate fix.

Excessive temperature will lead to engine shutdown in 10 seconds. 

Engine Coolant Temperature Error in engine coolant sender.

High engine coolant temperature.

Engine shutdown in 10 seconds for having a high-temperature engine coolant. 

Engine Air Filter The air filter switch needs to be connected.

The switch is facing high restrictions.

Hydraulic Filter The hydraulic filter switch is not attached and faces restrictions. 

Advanced Control System (ACS)

This Bobcat warning light symbol is for signaling any issues with the Advanced Hands Control system. It usually stays on but alerts the driver with beeping noises.

If you notice 3 consecutive beeps regarding the AHC, this means there’s a malfunction in the AHC system. 

It’s better to avoid any DIY strategies to solve the error in this case. As soon as you notice the beeping noises, you must contact a professional to identify and fix the AHC issue. 

Advanced Control System
Source: gmundcars.com

Attachment Control Device (ACD)

The ACD symbol refers to the Attachment Control Device. It stays lit to notify the electrically controlled attachment is present.

But if you see the ACD light flashing 3 times, it indicates an error in the Attachment control device. You need to check the Bobcat control instructions to fix this issue.   

General Warning

The 90-degree square box with an explanation sign is the general warning light symbol in a Bobcat machine. This symbol is a precaution sign for the engine’s operational defects. 

General Warning

If one or more engines stop working, this sign lights up with a red light. The same happens when the hydraulic function of the vehicle malfunctions. It’ll beep 3 times to warn you about the error. 

However, the general warning sign beeping 3 times also means the engine is at high speed. If the speed is extremely high, the warning sign flashes continuously. It indicates the engine will shut down within 10 seconds. 

Whenever you notice the engine speed is high, you can control it by using the engine speed controller on the right side of the operator’s seat. Simply, pull it backward to decrease the engine speed RPM. 

Fuel Level

Next, you’ll see a symbol like a gas cylinder which refers to the fuel level symbol. It signals when you have low fuel in your Bobcat vehicle.

Fuel Level

When you notice this warning light is beeping 3 times, it means 2 things. Either there’s a system fault in the fuel level sender system or the fuel is extremely low.

In this case, you need to add Grade No. 2 fuel at 40℉. Make sure you add the fuel only in the free movement area. Don’t keep anything flammable nearby. If the fuel filter is faulty, replace it immediately to prevent accidents. 

Glow Plugs

The glow plug warning light symbol is the one with a light bulb image. When it’s on, it means the glow plugs are working. You’ll also see a GLOXX written on the hour meter during this operation.

Glow Plugs

The XX will show you how much time the glow plugs will stay activated. But if you see the light flashing thrice, it means there’s an error with the glow plugs.

System Voltage

The battery-like symbol you notice on the dashboard is the system voltage warning light. This warning symbol lets you know if the voltage is high or low. And it works by beeping 3 times to send you a signal that the voltage is at fault. 

As soon as the system voltage warning light signals you, check the alternator if it’s defective. It’ll result in low charge issues so you need to fix it immediately. Again over-charging can be unhealthy for your vehicle. You need to find the reason too.   

Seat Belt

The seat belt warning light is to remind you to put on the seat belt while operating the vehicle. You’ll see the light ON for 45 seconds until you put on the seat belt. It’s actually to keep you safe while driving around the vehicle.

So, it’s best to wear your seat belt as soon as you’re about to fire the engine.

Engine Oil Pressure

Now, you’ll notice another light bulb-shaped icon on the dashboard with a drop drawn inside it. There are also two arrows pointing at the bulb from the two sides. This symbol warns you about the engine oil pressure state in your Bobcat tractor. 

Engine Oil Pressure Symbol

If you hear 3 beeps, this means the engine oil pressure is low. It can also be that the engine oil pressure sender is out of range. This happens when the wire is not connected to the sender or the wire is short-circuited due to high voltage. 

Finally, the warning light starts continuously flashing. This is a signal that the engine oil pressure is extremely low and the engine is about to shut off in 10 seconds. 

Hydrostatic Charge Pressure

Now, we’ll talk about the hydrostatic charge pressure which looks like a horizontally kept egg with 2 stars inside it. The entrances on both sides have arrows pointing upward. It indicates 3 types of warning signals – system error, low hydrostatic charge pressure, and shutdown.

With beeping 3x, the hydrostatic charge pressure light refers to a defect in the hydrostatic charge pressure. It can also mean that the charge is below its limits.

Again, when the symbol constantly keeps beeping, this means the engine will shut down in 10 seconds because of low hydrostatic charge pressure. 

Engine Coolant Temperature

The next symbol on your dashboard is an empty bulb and a thermometer beside the bulb. It alerts you whenever the engine coolant level or temperature is higher than required. 

If 3 beeps are coming from this warning light, you’ll understand the engine coolant temperature sender is out of range. Similarly, it can also mean the temperature is high.

Now when you see the light is constantly beeping, this means the temperature is so high that the engine prepares to get shut at 10 seconds. So, you have to maintain the temperature anywhere between 32-70℉.  

Hydraulic Oil Temperature

Well, the hydraulic oil bobcat warning light symbol also has a thermometer like the engine coolant temperature symbol. But it has a drop inside a ring beside that thermometer. This symbol helps you to get alerted about the temperature of hydraulic oil. 

When the hydraulic oil temperature sender doesn’t work or the temperature is high, it beeps 3 times. It keeps continuously beeping for high temperatures and signals you the engine will turn off in 10 seconds.  

Engine Air Filter

The symbol with an arrow getting inside a light bulb is the engine air filter sign. If the air filter switch is not connected, you’ll see this light ON and having 3 beeps. But if you see the light flashing with 3 beeps, note that the air filter is facing high restrictions.  

Hydraulic Filter

Finally, you’ll notice the hydraulic filter symbol showcasing a drop inside a ring. This warning sign beeps 3 times and stays lit when the hydraulic filter switch isn’t connected. But it flashes with 3 beeps when the hydraulic filter has high restrictions. 

Maintenance Tips to Prevent Bobcat Warning Lights

Proper maintenance is essential to prevent warning lights and ensure the optimal performance of your Bobcat equipment.

Here are some general maintenance tips to help you avoid common issues that may trigger warning lights:

  • Regular Inspections: Conduct regular visual inspections of your Bobcat equipment. Check for any loose or damaged components, leaks, or unusual wear.
  • Fluid Levels: Ensure that all fluid levels, including engine oil, hydraulic fluid, coolant, and fuel, are at the recommended levels. Check for any signs of leaks.
  • Filter Replacement: Replace air, fuel, and hydraulic filters according to the manufacturer’s recommendations. Dirty filters can cause reduced performance and trigger warning lights.
  • Battery Health: Keep the battery in good condition. Clean the terminals regularly, check for proper voltage, and replace the battery if it shows signs of weakness.
  • Tire Maintenance: Inspect tires for proper inflation and any signs of damage. Replace tires that show excessive wear or damage.
  • Greasing: Lubricate all moving parts and pivot points as per the manufacturer’s guidelines. This helps reduce friction and prevents premature wear.
  • Cooling System: Ensure the cooling system is functioning correctly. Clean debris from the radiator and check for any coolant leaks.
  • Inspect Belts and Chains: Check belts and chains for proper tension and any signs of wear. Replace any damaged or worn components promptly.
  • Electrical System: Inspect the wiring, connectors, and electrical components for signs of damage. Ensure all connections are secure and free of corrosion.
  • Software Updates: Keep the equipment’s software and control systems up to date. Some warning lights may be related to software issues that can be addressed through updates.
  • Operator Training: Ensure that operators are properly trained on the equipment. Misuse or improper operation can lead to issues that trigger warning lights.
  • Address Warning Lights Promptly: If a warning light does appear, address the issue promptly. Refer to the equipment manual for guidance on troubleshooting and consult with authorized service technicians if needed.
  • Store Equipment Properly: When not in use, store the equipment in a dry and secure location. Protect it from the elements to prevent corrosion and other damage.
  • Follow Maintenance Schedule: Adhere to the manufacturer’s recommended maintenance schedule. Regular maintenance at specified intervals can prevent potential issues.

FAQs

What Number Is a Bobcat Key?

The bobcat key number is  6693241. This ignition key fits most of the Bobcat vehicles. 

Does A Bobcat Have A Battery?

Yes, Bobcat has a battery. It is specially manufactured by Bobcat. 

How Often Should I Change the Oil In My Bobcat?

You should change the oil in your Bobcat every 250 operating hours. 

Conclusion

Hopefully, you’re now aware of the Bobcat warning light symbols meaning. Each of the warning lights represents a safety measure.

So, as soon as you notice any light beeping or ON, you have to check for any issues in your Bobcat. Only then, you can expect to extend the longevity of your tractor.

Author

Leave a Comment

Your email address will not be published. Required fields are marked *