Can Am Renegade 110 Oil Capacity – The Ultimate Guide For Perfect Oil

Let’s be honest. Getting the oil level just right in your kid’s Can-Am Renegade 110 can feel surprisingly tricky. It’s a small engine, but its health is just as critical as the one in your full-size rig. Too little oil and you’re staring down the barrel of a seized engine; too much and you’re dealing with a smoky, sluggish mess that can blow seals.

You’re in the right place. We’re going to take all the guesswork out of it. This isn’t just a number; it’s a complete guide to understanding, checking, and changing the oil in this awesome youth ATV.

In this guide, you’ll get the exact can am renegade 110 oil capacity, a step-by-step walkthrough of a full oil change, pro tips for choosing the right oil, and how to spot common problems before they sideline your young rider for the weekend. Let’s get those hands dirty and do this right.

Why Getting the Can-Am Renegade 110 Oil Capacity Right is Non-Negotiable

It’s easy to think, “It’s just a small ATV, how important can it be?” The answer is: extremely important. The oil in that little engine is its lifeblood, performing several critical jobs at once. Understanding the benefits of maintaining the correct oil level is the first step in our comprehensive can am renegade 110 oil capacity care guide.

The Triple-Threat: Lubrication, Cooling, and Cleaning

First and foremost, oil provides lubrication. It creates a micro-thin film between fast-moving metal parts like the piston, cylinder, and crankshaft bearings. Without this film, you get metal-on-metal friction, which rapidly leads to catastrophic engine failure. The correct oil capacity ensures this film is consistent and complete.

Second, oil is a crucial part of the cooling system. While the Renegade 110 is air-cooled, the oil plays a massive role by absorbing heat from internal components and carrying it away. An engine that’s low on oil will run hotter, accelerating wear and tear on everything inside.

Finally, oil cleans the engine. As it circulates, it picks up tiny metal shavings, carbon deposits, and other gunk. These contaminants are then trapped in the oil screen. An oil change doesn’t just replenish the oil; it removes these harmful particles from the system.

The Official Can-Am Renegade 110 Oil Capacity: The Numbers You Need

Alright, let’s get straight to the point. The information you came here for. No more searching through forums or squinting at a greasy owner’s manual. This section is your definitive can am renegade 110 oil capacity guide.

For a standard oil and filter screen service on the Can-Am Renegade 110 EFI, the specified oil capacity is:

0.95 US quarts
0.9 Liters

Pro Tip: Never dump the full amount in at once. Always start with about 80% of the total capacity, then add the rest slowly while checking the dipstick. It’s far easier to add a little more oil than it is to remove it if you overfill.

Dry Fill vs. Wet Fill: What’s the Difference?

You might see different capacities listed online. This is often due to the difference between a “wet fill” (a standard oil change) and a “dry fill” (after a complete engine rebuild). The 0.95 qt / 0.9 L figure is for a standard oil change where some residual oil remains in the engine.

For 99% of DIY maintenance, you will only ever need the standard “wet fill” capacity. The dry fill capacity is only relevant if you’ve completely disassembled and reassembled the engine.

Your Step-by-Step Can-Am Renegade 110 Oil Change Guide

Knowing the number is one thing; doing the job correctly is another. Follow these steps for a clean, safe, and effective oil change. This is the core of learning how to can am renegade 110 oil capacity maintenance yourself.

H3: Step 1: Gather Your Tools and Supplies

Having everything ready beforehand makes the job smooth and prevents you from running to the store covered in oil. Here’s what you’ll need:

Wrench/Socket Set: You’ll need the correct size for the drain plug (typically 17mm) and the oil screen cap.
Oil Drain Pan: A dedicated pan is best to avoid messy spills.
Funnel: A clean funnel is essential for adding new oil without making a mess.
Shop Rags or Paper Towels: You will make a mess. It’s inevitable.
Nitrile Gloves: Used motor oil is nasty stuff. Protect your skin.
New Motor Oil: 1 quart of XPS 4T 5W-40 Synthetic Blend Oil or a compatible JASO MA certified 5W-40 ATV/motorcycle oil.
New Drain Plug Sealing Washer: A new crush washer ensures a leak-free seal. Don’t skip this!

Step 2: Warm Up and Drain the Old Oil

First, start the ATV and let it run for 2-3 minutes. This warms the oil, making it flow out faster and carrying more suspended contaminants with it. Don’t get it scorching hot, just warm to the touch.

Park the Renegade on a level surface. This is critical for an accurate oil level reading later.
Locate the oil drain plug on the bottom of the engine case. Place your drain pan directly underneath it.
Using your wrench, loosen the drain plug. Finish unscrewing it by hand to control its removal and avoid dropping it in the hot oil.
Let the oil drain completely. This might take 5-10 minutes.

Step 3: Clean the Oil Screen

The Renegade 110 doesn’t have a traditional spin-on oil filter. Instead, it has a reusable mesh oil screen. Cleaning this is a vital part of the service.

Locate the oil screen cap. It’s a larger plug, often near the drain plug.
Place the drain pan underneath it and carefully remove the cap. Be ready for a spring and the screen to come out with it.
Carefully inspect the screen for any large metal debris (a bad sign) or sludge.
Clean the screen thoroughly with brake cleaner or a solvent and a soft brush. Let it dry completely.
Reinstall the screen, spring, and cap. Tighten the cap to the specified torque.

Step 4: Refill with Fresh Oil

Now for the main event. This is where knowing the precise can am renegade 110 oil capacity pays off.

Wipe the drain plug area clean and install the drain plug with a new sealing washer. Tighten it snugly, but don’t overtighten and strip the threads.
Locate the oil fill cap/dipstick on the side of the engine. Remove it and wipe it clean.
Place your funnel in the fill hole and slowly pour in about 0.8 quarts (or 0.75 Liters) of new oil.
Re-insert the dipstick but do not screw it in. Just rest it on the threads to check the level.
Pull the dipstick out, wipe it, and check the level. Add small amounts of oil until the level is at the upper mark on the cross-hatch pattern.
Once the level is correct, screw the fill cap/dipstick in securely.

Safety First: After filling, start the engine and let it run for about 30 seconds. This circulates the new oil. Shut it off, wait a minute for the oil to settle, and then re-check the level one last time, topping off if necessary.

Choosing the Right Oil: More Than Just Capacity

Using the correct volume of oil is pointless if it’s the wrong type of oil. The Renegade 110 engine has specific needs. BRP (the parent company of Can-Am) recommends their XPS 4T 5W-40 Synthetic Blend Oil.

If you can’t find XPS, look for a high-quality 5W-40 ATV or motorcycle-specific oil that is JASO MA or MA2 certified. This certification is crucial because it means the oil is designed to work with a wet clutch system, which many ATVs have. Using standard car oil can cause clutch slippage and damage.

Common Problems with Can-Am Renegade 110 Oil Capacity (And How to Fix Them)

Even with the best intentions, things can go wrong. Here are some of the most common problems related to oil capacity and how to handle them. This is one of the most important can am renegade 110 oil capacity tips we can offer.

The Dangers of Overfilling

Adding too much oil is a common mistake. The spinning crankshaft will whip the oil into a foam, like beating egg whites. This aerated oil doesn’t lubricate properly and can lead to increased pressure that blows out seals and gaskets, causing leaks.

The Fix: If you overfill, you must drain the excess. The easiest way is to slightly loosen the drain plug and let a small amount drip out until the level is correct on the dipstick. It’s messy, but necessary.

The Risks of Underfilling

This is the most dangerous mistake. Running the engine low on oil causes insufficient lubrication and cooling. This quickly leads to overheating, friction, and potentially a completely seized engine that requires a costly rebuild.

The Fix: Check the oil level before every ride! It takes 30 seconds. If it’s low, top it off with the correct oil immediately. If it’s consistently low, you have a leak or the engine is burning oil, and you need to investigate further.

Eco-Friendly Oil Changes: A Sustainable Approach to ATV Maintenance

Being an off-roader means respecting the trails and the environment. A key part of that is handling waste products responsibly. Adopting a sustainable can am renegade 110 oil capacity mindset is easy and makes a big difference.

Used motor oil is highly toxic and must never be poured down a drain or on the ground. A single quart of oil can contaminate thousands of gallons of water.

Fortunately, disposal is easy. Pour your used oil from the drain pan into a sealed container (like the empty new oil bottle). Nearly all auto parts stores (AutoZone, O’Reilly, Advance Auto Parts) will accept used motor oil for recycling free of charge. It’s one of the most important eco-friendly can am renegade 110 oil capacity practices you can adopt.

Frequently Asked Questions About Can-Am Renegade 110 Oil Capacity

How often should I change the oil in a Can-Am Renegade 110?

According to the official BRP maintenance schedule, you should perform the first oil change after the initial break-in period (around 10-15 hours). After that, a good rule of thumb is every 6 months or every 50 hours of use, whichever comes first. If you ride in very dusty or muddy conditions, change it more frequently.

What happens if I use car oil in my Renegade 110?

You should avoid this. Most modern car oils contain friction modifiers designed to improve fuel economy. These same additives can cause the wet clutch in an ATV to slip, leading to poor performance and premature wear. Always use a JASO MA or MA2 certified motorcycle/ATV oil.

Do I need to clean the oil screen every single time I change the oil?

Yes, absolutely. Since the Renegade 110 doesn’t have a disposable filter, the screen is the only thing catching larger debris. Cleaning it is a critical step in a complete oil service. Skipping it means leaving harmful contaminants to circulate in your new oil.

Maintaining your young rider’s Renegade 110 is a fantastic way to teach them about mechanical responsibility and ensure their machine is safe and reliable for years of fun on the trails. Getting the oil service right is the foundation of that care.

Now you have the exact numbers, the right process, and the pro knowledge to tackle this job with confidence. So grab your tools, follow the steps, and keep that little engine running perfectly. Ride safe, and have fun out there!

Author
Recent Posts

Thomas Corle

Founder & Automobile expert at FatBoysOffroad

Automobile expert and off-road enthusiast, sharing in-depth knowledge of vehicles, gear, and adventures. Helping readers make smart decisions and enjoy the thrill of off-roading safely and confidently.