Ever stood at the mouth of a tight trail, squinting at the gate posts? Or stared at your trailer, tape measure in hand, filled with a sudden doubt? We’ve all been there. Wondering, “Will my Renegade actually fit?” is a rite of passage for every owner.
It’s a simple question, but the answer determines where you can ride, how you haul your machine, and even if it fits in your garage. Guessing can lead to scratched plastics, damaged property, or worse, being turned away from a trail system you drove hours to reach.
This is your complete, no-fluff guide to understanding your Can-Am Renegade dimensions. We promise to demystify every critical number, from width and wheelbase to ground clearance. You’ll learn not just the factory specs, but how to measure your rig for the real world, how these numbers impact performance, and the pro tips to solve common size-related headaches.
Why Your Can-Am Renegade Dimensions Are More Than Just Numbers
Thinking about your ATV’s specs might seem like homework, but these numbers are the key to unlocking a smoother ownership experience. Understanding the benefits of knowing your Can-Am Renegade dimensions translates directly to less stress and more ride time.
Here’s why these measurements are so critical:
- Trailering Confidence: Knowing your Renegade’s exact length and width ensures you buy the right trailer the first time. It helps you load it safely, centered, and with proper weight distribution, preventing dangerous trailer sway on the highway.
- Garage & Storage Fitment: Will it fit next to the family car? Can you clear the garage door header? Your machine’s overall height and length are the deciding factors.
- Trail Access & Legality: Many trail systems, especially on public lands, have strict width restrictions—often 50 inches. Knowing your exact width, especially after adding aftermarket wheels and tires, can be the difference between riding and going home.
- Performance & Stability: Dimensions like wheelbase (the distance between the front and rear wheels) and width directly affect handling. A longer wheelbase provides stability on high-speed runs, while a wider stance reduces the risk of tipping on off-camber trails.
- Maneuverability: A shorter wheelbase and narrower track width allow the Renegade to be incredibly agile in tight, wooded trails, letting you carve through trees where larger UTVs can’t follow.
The Complete Can-Am Renegade Dimensions Guide by Model
Can-Am offers the Renegade in several engine sizes and packages, and their dimensions can vary slightly. Always remember that these are the factory specifications. Your actual measurements can change based on tire choice, suspension settings, and accessories.
This section is your go-to can am renegade dimensions guide for the most popular models. We’ll focus on the key numbers you need to know.
Can-Am Renegade 570 / 650 Dimensions
The middleweight Renegades are fantastic all-around trail machines, known for being nimble and capable. Their dimensions reflect this agile nature.
- Overall Length: ~86 in (218.4 cm)
- Overall Width: ~48 in (121.9 cm)
- Overall Height: ~49 in (124 cm)
- Wheelbase: ~51 in (129.5 cm)
- Ground Clearance: ~10.5 in (26.7 cm)
- Estimated Dry Weight: ~678 lb (308 kg)
These models are typically narrow enough for most 50-inch restricted trails right off the showroom floor.
Can-Am Renegade 850 Dimensions
Stepping up to the 850 brings more power and often a slightly more aggressive stance, but the core dimensions remain very similar to the 650, keeping it a versatile trail weapon.
- Overall Length: ~86 in (218.4 cm)
- Overall Width: ~48 in (121.9 cm)
- Overall Height: ~49 in (124 cm)
- Wheelbase: ~51 in (129.5 cm)
- Ground Clearance: ~10.5 in (26.7 cm)
- Estimated Dry Weight: ~710 lb (322 kg)
Can-Am Renegade 1000R (X xc & X mr) Dimensions
This is where things get interesting. The big-bore Renegade 1000R comes in different flavors, and their dimensions are tailored to their purpose.
For the trail-focused Renegade X xc 1000R:
- Overall Length: ~86 in (218.4 cm)
- Overall Width: ~48.8 in (124 cm) – Note this is wider than the standard models!
- Overall Height: ~49 in (124 cm)
- Wheelbase: ~51 in (129.5 cm)
- Ground Clearance: ~10.5 in (26.7 cm)
- Estimated Dry Weight: ~728 lb (330 kg)
For the mud-dominating Renegade X mr 1000R:
- Overall Length: ~83 in (211 cm) – Shorter due to bumper design.
- Overall Width: ~50 in (127 cm) – Wider due to aggressive mud tires.
- Overall Height: ~50 in (127 cm) – Taller due to larger tires and snorkels.
- Wheelbase: ~51 in (129.5 cm)
- Ground Clearance: ~12.5 in (31.8 cm)
- Estimated Dry Weight: ~991 lb (450 kg) – Significantly heavier!
How To Measure Your Renegade’s Real-World Dimensions
Factory specs are a great starting point, but tires, wheel spacers, and lift kits can change everything. Here’s how to can am renegade dimensions check on your own machine for ultimate accuracy. This is one of the most important can am renegade dimensions tips we can offer.
Essential Tools You’ll Need
You don’t need a fancy workshop for this. Just grab a few simple items:
- A quality tape measure (25-foot is ideal)
- A long straight edge or a 4-foot level
- A friend to help hold the tape measure can make it easier
Measuring Overall Length
Park your Renegade on a flat, level surface. Measure from the absolute furthest point on the front (usually the bumper or winch) to the absolute furthest point on the rear (usually the grab bar). Don’t just measure the plastics. This total length is what you need for trailer and garage fitment.
Nailing Down the True Width
This is the most critical measurement for trail access. Place a straight edge vertically against the sidewall bulge of your front tires on both sides. Measure the distance between the two straight edges. This gives you the true overall width, which is often wider than the spec sheet suggests, especially with aftermarket wheels that have a different offset.
Checking Height and Ground Clearance
For overall height, measure from the level ground to the highest point on your ATV, which is usually the top of the handlebars or the gauge pod. For ground clearance, find the lowest point of the frame or skid plate (not the differential) and measure from there to the ground. Remember, tire pressure and suspension preload can affect both of these measurements slightly.
Common Problems with Can-Am Renegade Dimensions (And How to Solve Them)
Even with the right numbers, you can run into issues. Here are some common problems with Can-Am Renegade dimensions and practical solutions from the FatBoysOffroad crew.
“It Won’t Fit on My Trailer!”
A common mistake is buying a 5-foot wide (60-inch) utility trailer and assuming your 48-inch Renegade will fit with room to spare. The problem is often the trailer’s side rails or fenders. Always measure the usable width between the rails or fenders, not the overall deck width. If it’s too tight, consider a drive-over fender trailer or a flat deck design.
“My Garage Door is Too Low.”
You measured the Renegade’s height at 49 inches and your garage opening is 72 inches. Should be fine, right? But did you account for the trailer deck height? You need to measure the total height from the ground to the top of your Renegade while it’s loaded on the trailer. If it’s too tall, you may need a drop-axle trailer to lower the deck height.
Trail Access Woes: The 50-Inch Gate Problem
Your base Renegade is 48 inches wide, but you added aftermarket wheels and beefier tires. Suddenly, you’re measuring 51.5 inches wide at the tire bulge. You’ve just excluded yourself from all 50-inch restricted trails. The solution is careful wheel and tire selection. Look for wheels with a factory-like offset to avoid pushing the tires out further than necessary.
Pro Tips and Best Practices for Managing Your Renegade’s Size
Living with your Renegade’s size is easy when you follow a few best practices. This is more than a care guide; it’s about making ownership seamless.
Trailering Like a Pro
Once you confirm your Renegade fits, focus on safe trailering. Center the machine’s weight slightly forward of the trailer axle to achieve a proper tongue weight (about 10-15% of the total load). Use at least four high-quality ratchet straps, compressing the suspension slightly to secure the ATV firmly to the trailer deck. This prevents it from bouncing and shifting in transit.
Smart Storage Solutions
To save space in a crowded garage, consider using a set of vehicle dollies. Once you drive the Renegade onto the four dollies, you can easily push it sideways against a wall, freeing up valuable floor space. This is a game-changer for tight garages.
Sustainable Trail Use and Your ATV’s Footprint
Here’s where we can talk about sustainable can am renegade dimensions. Responsible off-roading means minimizing your impact. Knowing your exact width helps you adhere to trail restrictions, which are in place to prevent trail widening and erosion. By staying on the designated path, you’re practicing eco-friendly can am renegade dimensions management. You’re ensuring the trails we love stay healthy and open for everyone for years to come.
Frequently Asked Questions About Can-Am Renegade Dimensions
What is the width of a Can-Am Renegade 1000?
The width varies by model. The standard and X xc models are typically around 48 to 48.8 inches wide from the factory. The mud-focused Renegade X mr 1000R, however, is wider at approximately 50 inches due to its specialized tires and wheels.
Will a Can-Am Renegade fit in the bed of a pickup truck?
Generally, no. Most modern pickup truck beds, even full-size ones, are too short for a Renegade’s 86-inch length. The distance between the wheel wells is also often too narrow. Using a dedicated trailer is the safest and most recommended method for transport.
How much does a Can-Am Renegade weigh?
The dry weight ranges from about 678 pounds for a Renegade 570 to over 990 pounds for a Renegade X mr 1000R. Remember to add the weight of fluids, accessories (winch, bumpers), and gear to calculate your total weight for trailering.
Does adding a lift kit change the dimensions?
Yes. A suspension lift kit will primarily increase your overall height and ground clearance. Some lift kits can also slightly increase the track width, making your ATV wider. Always re-measure your machine after installing a lift kit.
Mastering your Can-Am Renegade dimensions is a fundamental part of being a smart, prepared owner. It’s not about memorizing numbers; it’s about understanding how your machine interacts with the world around it—from your garage to the most remote trails.
By taking a few minutes to measure and plan, you eliminate guesswork and prevent costly mistakes. You gain the confidence to know which trailer to buy, which trails you can conquer, and how to transport your pride and joy safely.
Now you have the knowledge. Get out there, measure with confidence, and hit the trails knowing your Renegade is ready for anything. Ride safe, and have a blast!
- 2018 Honda Accord Tire Size – The Ultimate Guide To Perfect Fit, - December 18, 2025
- 2012 Honda Accord Fuse Box Diagram – Your Ultimate Guide To DIY - December 18, 2025
- 2013 Honda Accord Fuse Box Diagram – Your Essential Guide To - December 18, 2025