You’ve got a Can-Am Traxter. You already know it’s a workhorse, a trail beast, and one of the most capable UTVs on the market. But let’s be honest, rolling up to the trailhead or the job site, it can look just like every other one that rolled off the factory floor.
We promise this guide will change that. We’re going to pull back the curtain on how you can transform your machine from stock to stunning, making it uniquely yours. It’s about more than just looks; it’s about making a statement and adding a tough layer of protection against the elements you love to conquer.
In this deep dive, we’ll walk you through everything you need to know about Can-Am Traxter colours, graphics and decal kits. We’ll cover factory options, the endless world of aftermarket kits, pro-level installation tips for a bubble-free finish, and how to keep your new look pristine for years to come.
Why Bother with Custom Graphics? More Than Just a Pretty Face
Thinking a graphics kit is just a vanity project? Think again. While making your rig look incredible is a huge plus, there are some serious practical benefits of Can-Am Traxter colours, graphics and decal kits that every owner should consider.
Personalize Your Rig: Stand Out from the Pack
This is the most obvious benefit. Your Traxter is an extension of your personality. Whether you want a stealthy camo look for hunting season, a bold racing-inspired design, or a custom graphic with your farm’s logo, a decal kit is the easiest way to achieve it.
It’s about turning a mass-produced machine into a one-of-a-kind ride that reflects who you are and what you use it for. No more mix-ups at a busy staging area!
The Unsung Hero: Paint and Plastic Protection
Here’s the secret weapon of a good graphics kit: protection. The trails, branches, and mud you love are brutal on your Traxter’s factory plastics. A high-quality vinyl wrap acts as a sacrificial layer.
It takes the scratches, scuffs, and dings so your original plastics don’t have to. This is one of the most overlooked benefits of Can-Am Traxter colours, graphics and decal kits. It’s like armor for your rig’s bodywork.
Boosting Resale Value
Believe it or not, a well-maintained graphics kit can actually increase your Traxter’s resale value. When it’s time to sell, you can peel the vinyl off to reveal pristine, like-new plastics underneath.
A buyer will always pay more for a machine that looks factory-fresh versus one that’s covered in trail rash. Alternatively, a really sharp, professionally applied kit can make your machine more desirable than a stock one.
Decoding Your Options: Factory Colours vs. Aftermarket Kits
When you’re ready to change up your look, you have two main paths: sticking with factory options or diving into the massive world of aftermarket kits. Let’s break down the differences.
Stock Can-Am Traxter Colours: What BRP Offers
Can-Am offers a solid range of colours from the factory, often tied to specific trim levels. You’ll see options like Tundra Green, Mossy Oak Break-Up Country Camo, Fiery Red, and Timeless Black.
These are great, durable finishes. However, your choices are limited to what BRP decides to produce for that model year. If you want something truly unique, the aftermarket is your playground.
The World of Aftermarket Graphics and Decal Kits
This is where the real fun begins. Aftermarket companies offer a dizzying array of designs, from full-coverage wraps to subtle accent kits. You can find everything:
- Camo Patterns: Beyond Mossy Oak, you’ll find digital, arctic, and traditional forest patterns.
- Race-Inspired Designs: Bold logos, sharp lines, and bright colours to make you look fast even when you’re parked.
- Abstract & Themed Graphics: From patriotic themes to wild, artistic patterns, the sky’s the limit.
- Custom Designs: Many companies allow you to work with their designers to create a completely custom look with your own logos, names, or colour schemes.
Material Matters: Vinyl Types and Finishes
Not all vinyl is created equal. The quality of the material directly impacts how easy it is to install, how it looks, and how long it lasts. Look for kits made from premium cast vinyl from trusted brands like 3M or Avery Dennison.
These materials often feature “air-release” or “bubble-free” technology, which has microscopic air channels in the adhesive, making installation much more forgiving for a DIYer. You’ll also choose a finish:
- Gloss: A shiny, paint-like finish that’s easy to clean.
- Matte: A flat, non-reflective finish for a modern, stealthy look.
- Satin: A perfect in-between with a subtle sheen.
The Ultimate Can-Am Traxter Colours, Graphics and Decal Kits Guide to Installation
Alright, you’ve picked your kit. Now for the fun part. Don’t be intimidated; with patience and the right prep, you can get professional results in your own garage. This is our essential how to Can-Am Traxter colours, graphics and decal kits breakdown.
Prep is Everything: Your Pre-Installation Checklist
Do not skip this step. 90% of a great graphics job is in the prep work. A clean, smooth surface is non-negotiable for proper adhesion.
- Deep Clean: Wash your Traxter thoroughly. Get all the mud, grime, and dirt off the plastics you plan to cover. Pay special attention to edges and crevices.
- Degrease: This is the most critical step. Wipe down every single surface that will get a decal with a 70% isopropyl alcohol solution on a clean, lint-free microfiber cloth. This removes any wax, oil, or residue.
-
Gather Your Tools:
- A spray bottle with a few drops of dish soap and water (for the “wet method”).
- A quality, felt-edged squeegee to prevent scratching the vinyl.
- A low-setting heat gun or hairdryer.
- A sharp utility knife or X-Acto blade for trimming.
- Masking tape to help with positioning.
The Step-by-Step Application Process (Wet vs. Dry Method)
For beginners, we highly recommend the wet application method. It allows you to slide the decal around and reposition it before it fully sticks, which is incredibly forgiving.
- Layout and Plan: Lay out all your decal pieces. Match them up to the corresponding plastic parts on your Traxter. This prevents you from putting a fender piece on a door.
- Position with Tape: Pick your first piece. Lightly tape it in place on the machine. This “hinge method” lets you align it perfectly before you ever remove the backing paper.
- Apply the Solution: Lift the decal (still hinged with tape). Lightly mist both the adhesive side of the vinyl and the plastic surface on your Traxter with your soap-and-water solution. Don’t soak it!
- Remove Backing and Squeegee: Peel off the backing paper completely. Let the decal lay onto the wet surface. Starting from the center and working your way out, use your squeegee to push the water and air bubbles out from under the vinyl. Use firm, overlapping strokes.
- Apply Gentle Heat: For curved or complex surfaces, use your heat gun on a low setting. Gently heat the vinyl to make it more pliable and help it conform to the shape of the plastic. Be careful not to overheat and melt the vinyl.
- Repeat and Cure: Repeat this process for every piece. Once everything is applied, let the machine sit for at least 24-48 hours in a garage or shaded area to allow the adhesive to fully cure and all the moisture to evaporate.
Pro Tips for a Flawless Finish
Want to take it to the next level? Here are some Can-Am Traxter colours, graphics and decal kits best practices from the pros:
- Work in a clean, dust-free environment. Wind and dust are your enemies.
- Take your time. Rushing leads to mistakes, wrinkles, and bubbles.
- Don’t stretch the vinyl too much. Overstretching can distort the graphic and lead to premature failure.
- For stubborn bubbles, you can use a very fine needle to poke a tiny hole and squeegee the air out. The hole will be virtually invisible.
Common Problems with Can-Am Traxter Colours, Graphics and Decal Kits (And How to Fix Them)
Even with careful application, you might run into a few issues. Don’t panic. Here’s how to troubleshoot the most common problems.
Pesky Bubbles and Wrinkles
If you spot a bubble after application, you can often fix it. Gently heat the area with your heat gun to reactivate the adhesive, then use your squeegee to push the air to the nearest edge. For a trapped bubble, use the pinprick method mentioned above.
Peeling Edges and Corners
This is almost always caused by improper surface prep or not enough heat on the edges. Make sure all edges are clean and dry. You can try gently heating the peeling edge and pressing it down firmly with your squeegee. Sometimes, using a bit of “edge-seal” adhesive primer before application on complex corners can prevent this.
Fading and Discoloration
This is a sign of a lower-quality vinyl or one without a UV-protective laminate. Always buy from a reputable brand. If your graphics are already faded, there isn’t a fix besides replacement. Prevention is key: look for kits that specifically advertise a UV-resistant overlaminate.
Best Practices for a Long-Lasting Look: The Care Guide
You’ve put in the work, now let’s keep it looking sharp. Your new graphics need a little TLC. Follow this simple Can-Am Traxter colours, graphics and decal kits care guide.
The Right Way to Wash Your Wrapped Traxter
Avoid high-pressure washers, especially on the edges of the decals, as they can lift the vinyl. Hand washing is always best. Use a mild automotive soap and a soft wash mitt.
Rinse thoroughly and dry with a clean microfiber towel or let it air dry. Avoid harsh chemicals or abrasive cleaners at all costs.
Protecting Your Graphics from the Elements
The sun’s UV rays are the biggest enemy of vinyl graphics. Whenever possible, store your Traxter indoors or under a cover to prolong the life and vibrancy of the colours. Applying a vinyl-safe ceramic spray coating can also add an extra layer of UV and scratch protection.
Choosing Eco-Friendly Cleaners for Sustainable Care
Looking for a more sustainable Can-Am Traxter colours, graphics and decal kits care routine? Many biodegradable, pH-neutral automotive soaps are perfectly safe for vinyl and much gentler on the environment. These eco-friendly Can-Am Traxter colours, graphics and decal kits cleaning options avoid harsh solvents that can damage both your wrap and the local ecosystem.
Frequently Asked Questions About Can-Am Traxter Graphics and Decals
How much do decal kits for a Can-Am Traxter cost?
Prices vary widely based on coverage, material quality, and design complexity. Simple accent kits might start around $150, while full-coverage, premium custom wraps can run from $500 to over $800.
Can I remove the graphics later?
Absolutely. One of the best parts of vinyl is that it’s removable. Gently heating the vinyl with a heat gun will soften the adhesive, allowing you to peel it off. Any remaining residue can typically be cleaned up with an adhesive remover.
Do graphics kits damage the original plastics?
No, quite the opposite. A high-quality kit from a reputable manufacturer will not harm your factory plastics. In fact, as we mentioned, it protects them from scratches and UV damage, preserving the finish underneath.
How long do vinyl graphics last?
With proper installation and care, a quality graphics kit should last anywhere from 3 to 7 years, depending on the material, climate, and how much abuse it takes on the trail.
Customizing your Can-Am Traxter with a new colour or graphics kit is one of the most rewarding projects you can tackle. It’s a fantastic way to protect your investment and make your machine a true reflection of your style.
Take your time with the prep, be patient during the application, and you’ll be rewarded with a head-turning rig that’s ready for anything. Now get out there and make that Traxter your own. Ride safe!
- 2018 Honda Accord Tire Size – The Ultimate Guide To Perfect Fit, - December 18, 2025
- 2012 Honda Accord Fuse Box Diagram – Your Ultimate Guide To DIY - December 18, 2025
- 2013 Honda Accord Fuse Box Diagram – Your Essential Guide To - December 18, 2025