Polaris Rzr Velocity Blue Paint Code - Your Ultimate Guide To A

There’s nothing quite like the brilliant, electric shine of a Polaris RZR in Velocity Blue. It’s a color that turns heads on the trail. But there’s also nothing more frustrating than that first deep scratch or rock chip that mars its perfect finish, a painful reminder of a tight squeeze or a kicked-up rock.

You don’t have to live with those blemishes or pay a fortune for a professional repair on minor scuffs. We promise to give you the exact information you need to perform a flawless touch-up yourself. This is your definitive guide to finding and using the polaris rzr velocity blue paint code for a perfect match.

In this article, we’ll walk you through locating your paint code, understanding the paint system Polaris uses, the step-by-step process for a professional-looking repair, and long-term care tips to keep that blue looking brand new. Let’s get that RZR looking factory-fresh again.

What Exactly is Velocity Blue and Why is the Paint Code So Important?

Velocity Blue isn’t just a simple blue. It’s a vibrant, metallic color that has depth and character, which is why it looks so incredible in the sun. This complexity is also why a generic “blue” touch-up paint from the auto parts store will stick out like a sore thumb.

The secret to a perfect repair lies in the paint code. This code is the specific formula a manufacturer uses to create that exact shade. Think of it as a recipe that specifies the exact mix of pigments, metallics, and pearls needed to replicate the color perfectly.

The primary polaris rzr velocity blue paint code is P518. However, it’s crucial to understand this is often a two-stage paint, meaning it requires a base coat (the color) followed by a clear coat for protection and shine. Using the code ensures you get an exact match, preserving your RZR’s look and resale value. This is one of the main benefits of polaris rzr velocity blue paint code knowledge: maintaining your machine’s integrity.

Your Polaris RZR Velocity Blue Paint Code: Where and How to Find It

While we know the common code is P518, it’s always one of the polaris rzr velocity blue paint code best practices to confirm the code on your specific vehicle. Manufacturing runs can have slight variations, and confirming ensures a 100% perfect match.

Unfortunately, unlike cars, Polaris doesn’t always place a convenient sticker with the paint code in the door jamb. Finding it can sometimes feel like a scavenger hunt.

Common Locations for Your RZR’s VIN and Color Info:

Frame Stamping: The most reliable place is the Vehicle Identification Number (VIN) stamped directly onto the frame. Look on the left front lower frame rail. You may need to clean off some mud to see it clearly.
Owner’s Manual: Your original owner’s manual may list the color specifications for your model year.
Under the Seat or Hood: On some models, you might find a specification sticker under the driver’s seat or on the underside of the hood or front access panel.

If you can’t find a physical code, don’t panic. Your local Polaris dealer can pull up the exact specifications for your machine using your VIN. This is the most foolproof method to guarantee you’re ordering the right paint.

The Complete Polaris RZR Velocity Blue Paint Code Guide for a Perfect Match

Once you have your code (P518), you need to get the right paint. You have a few options, each suited for different types of repairs. This polaris rzr velocity blue paint code guide will help you choose the right product for your job.

Types of Touch-Up Paint Available

Touch-Up Pens: Best for tiny rock chips and very fine scratches. These are easy to use and great for quick fixes. They have a fine tip for precise application, minimizing the chance of creating a blob of paint.
Aerosol Spray Cans: Ideal for larger scratches, scuffs on plastic panels, or respraying a small part like a fender flare. Getting a professional-looking finish from a spray can requires technique, but it’s very achievable for a careful DIYer.
Pint/Quart Cans: For professional use with a spray gun. This is for major repairs, like painting a whole new door or hood. Unless you have professional bodywork experience and equipment, it’s best to stick with pens or aerosol cans.

Choosing Your Supplier

You can often order touch-up paint directly from your Polaris dealer. Alternatively, several reputable online automotive paint suppliers can mix the P518 formula for you in the format you need (pen, aerosol, etc.). Companies like TouchUpDirect or AutomotiveTouchup are popular choices among enthusiasts.

When ordering, be prepared to provide your RZR’s year, model, and VIN to ensure the formula is tweaked for any minor variations. This is a key part of how to polaris rzr velocity blue paint code matching is done correctly.

Step-by-Step: How to Touch Up Your RZR’s Velocity Blue Paint

Alright, you’ve got your paint. Now for the fun part. The secret to a repair that blends seamlessly is 90% preparation and 10% application. Do not rush the prep work!

H3: Step 1: Gather Your Tools and Safety Gear

Before you start, make sure you have everything you need. Working in a well-ventilated area, preferably outdoors or in an open garage, is non-negotiable. Fumes are no joke.

Safety First: Nitrile gloves, safety glasses, and a respirator mask (especially for aerosol).
Cleaning Supplies: Degreaser or wax and grease remover, lint-free cloths.
Sanding/Prep: 2000-grit wet/dry sandpaper, a small foam block, masking tape, and paper.
Paint: Your P518 Velocity Blue touch-up paint and a high-quality clear coat.
Finishing: Polishing compound and a clean microfiber towel.

H3: Step 2: The Critical Prep Work

Clean the damaged area thoroughly with soap and water, then dry it completely. Follow up with the wax and grease remover on a clean cloth. This ensures the new paint has a perfectly clean surface to adhere to.

For scratches, you may need to very gently wet-sand the area with 2000-grit sandpaper to smooth out the edges. The goal is just to feather the edges of the scratch, not to sand down to the bare plastic. Mask off the surrounding area to prevent overspray.

H3: Step 3: Applying the Base Coat (Color)

Shake your paint pen or aerosol can thoroughly, for at least a minute. Test the paint on a hidden spot or a piece of cardboard to check the color match and flow.

For a pen: Dab the paint into the chip or scratch. Apply thin layers, letting each layer dry for about 20-30 minutes. Build it up until it’s just level with the surrounding paint.

For an aerosol can: Hold the can 6-8 inches from the surface. Apply light, sweeping coats, overlapping each pass by about 50%. It’s better to apply 2-3 very thin coats than one thick, heavy coat which can run and sag. Let each coat “flash off” (dry to a dull finish) before applying the next.

H3: Step 4: Applying the Clear Coat

After your last color coat has dried for at least an hour, it’s time for the clear coat. This protects the color and gives it that factory gloss. Apply the clear coat using the same technique as the base coat—2-3 light, even coats are best. The clear coat will make the color “pop” and match the surrounding shine.

H3: Step 5: Finishing and Blending

Let the clear coat cure for at least 24-48 hours. It might look a little rough or have some “orange peel” texture. To fix this, you can wet-sand the repaired area very lightly with 2000-grit sandpaper until it’s smooth.

Finally, use a quality polishing compound on a microfiber cloth to buff the area. This will remove any fine sanding scratches and blend the new finish perfectly with the old one. Step back and admire your invisible repair!

Common Problems with Polaris RZR Velocity Blue Paint Code Application (And How to Avoid Them)

Even with the best intentions, things can go wrong. Here are some common problems with polaris rzr velocity blue paint code touch-ups and how to steer clear of them.

Poor Color Match: This usually happens from not confirming the code with a VIN or buying a low-quality paint. Always use your VIN when ordering.
Paint Runs or Drips: This is caused by applying too much paint at once or holding the aerosol can too close. Remember: thin coats are your friend.
“Fish Eyes” or Craters: These are small, circular defects caused by surface contamination (oil, silicone, wax). The solution is meticulous cleaning with a wax and grease remover before you start.
Grainy or Rough Texture: This can be from spraying in high humidity or not shaking the can enough. Shake the can vigorously and try to paint on a dry, low-humidity day.

Following a sustainable polaris rzr velocity blue paint code process means not having to redo your work. By taking your time and doing it right the first time, you save paint, materials, and frustration. Choosing modern low-VOC (Volatile Organic Compound) paints is also a great eco-friendly polaris rzr velocity blue paint code option to reduce your environmental impact.

Long-Term Care: A Velocity Blue Paint Code Care Guide

You’ve done the repair, now how do you keep it looking great? This simple polaris rzr velocity blue paint code care guide will help protect your entire machine’s finish.

Wash Regularly: Don’t let mud and dirt sit on the paint. Use a pH-neutral automotive soap.
Wax or Seal: Apply a quality wax or paint sealant every few months. This adds a protective layer against UV rays and makes cleaning easier.
Address Chips Quickly: The moment you notice a new rock chip, clean it and seal it with a dab from your touch-up pen. This prevents it from getting worse.
Avoid Harsh Cleaners: Never use dish soap or abrasive household cleaners on your RZR’s paint.

Frequently Asked Questions About the Polaris RZR Velocity Blue Paint Code

What is the paint code for Polaris Velocity Blue?

The most common paint code for Polaris RZR Velocity Blue is P518. However, it is always a best practice to confirm this with your vehicle’s VIN at a dealership to account for any model-year variations.

Is Polaris Velocity Blue a two-stage or single-stage paint?

It is a two-stage paint. This means it requires a colored base coat (P518) followed by a separate application of a clear coat. The clear coat provides the gloss and vital protection for the color underneath.

Can I get Velocity Blue paint in a spray can?

Yes, absolutely. Many automotive paint suppliers can mix the P518 formula and put it into a professional-grade aerosol spray can for you. This is a great option for repairing larger scuffs on plastic body panels.

Taking care of your RZR’s finish is a rewarding part of ownership. With the right code, a little patience, and the proper technique, you can easily fix those trail scars and keep your machine looking its absolute best. So grab your tools, follow these steps, and get ready to hit the trails with a flawless finish. Ride safe out there!

Author
Recent Posts

Thomas Corle

Founder & Automobile expert at FatBoysOffroad

Automobile expert and off-road enthusiast, sharing in-depth knowledge of vehicles, gear, and adventures. Helping readers make smart decisions and enjoy the thrill of off-roading safely and confidently.