There’s nothing quite like the sight of your Polaris machine gleaming in that iconic, electric Voodoo Blue. It’s a color that turns heads on the trail and in the parking lot. But there’s also nothing quite as frustrating as that first deep scratch or rock chip that mars its perfect finish. You know the feeling—it’s all you can see every time you look at your ride.
We promise this guide will be your definitive resource for tackling those imperfections head-on. We’re going to demystify the entire process, from locating the correct polaris voodoo blue paint code to applying it like a pro for a seamless, factory-fresh repair.
In this article, you’ll learn exactly where to find your paint code, the difference between OEM and aftermarket paint options, a detailed step-by-step application process for a flawless finish, and how to solve common problems you might encounter along the way. Let’s get that blue looking new again.
What Exactly Is the Polaris Voodoo Blue Paint Code?
First things first, let’s clear up a common misconception. “Voodoo Blue” is the marketing name, but for a perfect match, you need the specific formula code. Think of it like a recipe—the name is “chocolate cake,” but the code gives you the exact ingredients and measurements.
The official polaris voodoo blue paint code is typically P-959. However, it’s crucial to always verify this against your specific vehicle’s VIN, as Polaris may have subtle variations between model years or special editions.
More importantly, this isn’t your grandpa’s single-stage enamel. Voodoo Blue is a modern, multi-stage finish. This means it consists of at least two parts:
- Base Coat: This layer contains the actual Voodoo Blue pigment. It goes on flat and provides the color.
- Clear Coat: This is the durable, glossy top layer that protects the base coat from UV rays, scratches, and chemicals. It provides the depth and shine that makes the color pop.
Using the correct code and applying both stages is non-negotiable for a repair that truly blends in. Skipping the clear coat will leave you with a dull, unprotected patch that sticks out like a sore thumb.
How to Find Your Polaris Voodoo Blue Paint Code: A Step-by-Step Guide
Finding the code is the critical first step. Don’t just guess or rely on a forum post from five years ago. Here’s a simple polaris voodoo blue paint code guide to locate the exact information for your machine.
Step 1: Check Your Owner’s Manual
This is the easiest place to start. Polaris often includes vehicle specifications, including paint codes, in the owner’s manual that came with your RZR, Ranger, or Sportsman. Check the index for “paint,” “specifications,” or “vehicle information.”
Step 2: Locate the VIN Sticker
Every Polaris has a sticker or plate with the Vehicle Identification Number (VIN). This label often includes other critical data, sometimes including the paint code. Look for it on the frame, typically on a downtube near the front of the machine or under the seat. The code might be labeled as “PAINT” or “COLOR.”
Step 3: Call a Polaris Dealership
This is the most reliable method. Have your VIN ready and call the service or parts department of any authorized Polaris dealer. They can look up your machine in their system and give you the exact, confirmed paint code in seconds. This removes all guesswork.
Sourcing the Right Paint: OEM vs. Aftermarket Options
Once you have the code P-959 (or the specific one for your VIN), you need to get the paint. You have two main routes, each with its own set of benefits.
OEM Polaris Touch-Up Kits
Polaris sells its own touch-up paint kits directly through dealerships. These are your best bet for a guaranteed 100% color match.
- Pros: Perfect factory match, easy to order through a dealer.
- Cons: Often more expensive, typically only available in small quantities like touch-up pens or small brush bottles, which aren’t ideal for larger repairs.
Aftermarket Paint Suppliers
Several reputable companies specialize in mixing automotive and powersports paint. Brands like ColorRite and TouchUpDirect, or even a local auto body supply shop, can mix the polaris voodoo blue paint code for you.
- Pros: More format options (aerosol spray cans, paint pens, quarts for spray guns), often more cost-effective.
- Cons: There’s a very slight risk of a minor color variation, so it’s wise to do a test spray on a piece of cardboard first.
The Essential Polaris Voodoo Blue Paint Code Application Process
Alright, you’ve got your code and your paint. Now for the fun part. Patience and preparation are everything here. Rushing this process is the number one cause of a bad result. This is one of the most important polaris voodoo blue paint code tips we can offer.
Tools and Materials You’ll Need
Gather everything before you start. There’s nothing worse than having to stop mid-job to run to the store.
- Safety Gear: Respirator mask, safety glasses, and nitrile gloves are a must.
- Cleaning: Wax & Grease Remover (or isopropyl alcohol) and clean microfiber towels.
- Sanding: 400, 800, and 1500-grit wet/dry sandpaper. A small sanding block helps.
- Masking: High-quality automotive painter’s tape and masking paper.
- Application: Primer (adhesion promoter for plastic, or filler primer for deep scratches), your Voodoo Blue base coat, and a quality 2K clear coat (aerosol cans with a hardener are best).
- Finishing: Polishing compound and a clean microfiber applicator pad.
Step 1: Meticulous Preparation is Key
The quality of your repair is determined here. Clean the damaged area and a few inches around it with soap and water, then dry it completely. Follow up with the wax and grease remover to ensure the surface is perfectly free of contaminants.
Next, use painter’s tape to mask off a crisp border around the repair area. This prevents overspray and gives you a professional-looking result.
Step 2: Sanding and Priming
For small chips, you may just need to clean and prime. For scratches, use 400-grit sandpaper to feather the edges of the scratch, creating a smooth, gradual transition to the original paint. Once smooth, clean the area again.
Apply 2-3 light coats of primer, allowing it to “flash” (dry to a dull finish) for about 10 minutes between coats. Let the primer cure fully (check the can for times), then lightly wet-sand it with 800-grit sandpaper until it’s perfectly smooth.
Step 3: Applying the Voodoo Blue Base Coat
Shake your base coat can for at least two full minutes. Hold the can 6-8 inches from the surface and apply in light, sweeping motions, overlapping each pass by about 50%. The goal is coverage, not thickness.
Apply 2-3 coats, waiting for the paint to flash between each one. The color will look flat and uneven at this stage—that’s normal! This is a core part of how to polaris voodoo blue paint code application works.
Step 4: Sealing the Deal with Clear Coat
The clear coat brings the shine and protection. After the final base coat has flashed (usually 20-30 minutes), begin applying the clear coat using the same light, overlapping technique. A 2K clear coat with a built-in hardener will give you the most durable, gas-resistant finish.
Apply 2-3 wet coats. This layer is more prone to running, so keep the can moving and don’t linger in one spot. The finish will look glossy and professional right away.
Step 5: Curing and Finishing
Do not touch the paint! Let it cure for at least 24-48 hours in a warm, dry, dust-free environment. For a truly seamless blend, you can wait a week, then lightly wet-sand the clear-coated area with 1500-grit sandpaper and use a polishing compound to buff out any texture and blend the edges of the repair perfectly.
Common Problems with Polaris Voodoo Blue Paint Code Repairs
Even with careful work, issues can arise. Here’s a look at some common problems with polaris voodoo blue paint code repairs and how to fix them.
Poor Color Match
This can happen if your machine’s original paint has faded from sun exposure. The best fix is to “blend” the repair by extending your color and clear coats slightly further into the original paint with each pass. This creates a gradual transition that tricks the eye.
“Orange Peel” Texture
This bumpy texture is caused by paint drying too quickly or being sprayed from too far away. You can fix this by letting the clear coat fully cure, then wet-sanding with 1500-grit paper and polishing it to a smooth, glass-like finish.
Paint Runs or Sags
This happens when you apply a coat too heavily. If you catch it while wet, you can sometimes gently dab it with a foam brush. If it dries, you’ll have to let it cure completely, carefully sand the run flat, and re-apply your clear coat.
The Polaris Voodoo Blue Paint Code Care Guide: Keeping it Vibrant
Once your repair is done, or if you just want to protect your factory finish, a proper polaris voodoo blue paint code care guide is essential. The benefits of polaris voodoo blue paint code maintenance are a long-lasting, deep shine.
Use the two-bucket wash method to prevent scratches. Apply a quality wax or, even better, a ceramic coating to provide a hard, protective layer against UV rays and minor scuffs. For light dust, consider a sustainable polaris voodoo blue paint code approach by using a waterless wash and plush microfiber towels. These eco-friendly polaris voodoo blue paint code practices reduce water usage and protect your investment.
Frequently Asked Questions About the Polaris Voodoo Blue Paint Code
Is Voodoo Blue a single-stage or multi-stage paint?
It is a multi-stage paint, consisting of a colored base coat and a protective clear coat. Both are required for a proper repair that matches the depth, shine, and durability of the factory finish.
Can I use a different brand of blue automotive paint that looks close?
We strongly advise against it. Paint codes are precise formulas. A “close” color will stick out dramatically in different lighting conditions. Using the exact polaris voodoo blue paint code is the only way to ensure a seamless match.
What is the official Polaris paint code for Voodoo Blue?
The most common code is P-959. However, you should always confirm this with your vehicle’s VIN at a Polaris dealership to account for any variations by model year or special edition.
Fixing scratches on your pride and joy is one of the most satisfying DIY projects you can tackle. By finding the right code, taking your time with prep, and following the steps, you can make those trail scars disappear. Your Voodoo Blue will be back to turning heads for all the right reasons.
Now get out there, keep the shiny side up, and ride with pride. We’ll see you on the trails!
- 2008 Honda Accord Serpentine Belt – Your Ultimate DIY Replacement And - December 18, 2025
- 2010 Honda Accord Horsepower – Unlocking Its Potential & Boosting - December 18, 2025
- Why Is My Honda Accord Leaking Water On Passenger Floor – Your - December 18, 2025