Will A Can Am Renegade Fit In A Truck – The Ultimate Measurement

You’ve got the beast in your garage—a Can-Am Renegade, itching for mud and trails. You’ve got your trusty pickup, ready to haul it. Now comes the million-dollar question that every new owner faces: will a Can Am Renegade fit in a truck without having to hook up a trailer? It’s a puzzle of inches and pounds, and getting it wrong can lead to a seriously bad day.

You’re not alone in asking this. We see it all the time. You want the convenience of just loading up and going, but you’re worried about damaging your ATV, your truck, or worse.

Promise yourself this: by the time you finish this guide, you’ll have a rock-solid answer. We’re going to give you the exact measurements, a bed-by-bed breakdown, a step-by-step loading process, and the pro tips to do it safely and confidently. We’ll cover everything from choosing the right ramps to avoiding the common, costly mistakes that can leave your machine (and your wallet) hurting.

First Things First: Understanding the Key Variables

The simple answer is, it depends. Not all Renegades are the same, and not all truck beds are created equal. Before you even think about firing up the engine, you need to become a master of measurements.

Getting this right is the foundation of this entire operation. The three critical factors you must consider are:

The Renegade’s Dimensions: The specific model and year dramatically change its length, width, and weight. A Renegade 570 is a different animal than a massive X MR 1000R with big mud tires.
Your Truck Bed’s Usable Space: It’s not just about the advertised length (e.g., 6.5-foot bed). You need the real-world measurements between the wheel wells and the actual length from the bulkhead to the end of the tailgate.
Your Truck’s Payload Capacity: This is arguably the most overlooked and most critical number. It’s the maximum weight your truck can safely carry, including the ATV, you, your gear, and anything else in the truck.

Know Your Numbers: Renegade Specs vs. Truck Bed Reality

Let’s get down to the nitty-gritty. Grab a tape measure and your owner’s manuals. Guesswork is your enemy here; precision is your best friend. This section forms the core of our will a can am renegade fit in a truck guide.

Can-Am Renegade Specs You MUST Know

Can-Am Renegades are sport-utility ATVs built for performance, meaning they are often long and wide. Here are some approximate figures for popular models. Always check the official specs for your exact year and model!

Can-Am Renegade 570/650: Roughly 86 inches long, 48 inches wide, and weighs around 700 lbs.
Can-Am Renegade 850: Also around 86 inches long, 48 inches wide, but heavier at nearly 800 lbs.
Can-Am Renegade 1000R (X XC & X MR): These can be the same length (86 inches) or longer, but the X MR models with massive tires can be wider and push well over 900 lbs.

The key takeaway? Most stock Renegades hover around the 86-inch mark in length (that’s 7 feet, 2 inches) and are 48 inches wide. This width is important because it needs to clear your truck’s wheel wells.

Decoding Your Truck Bed’s True Size

Truck beds come in a few standard sizes, but the marketing name doesn’t tell the whole story. Get your tape measure.

Measure Width: Measure the distance between the inside of your bed rails. Then, measure the narrowest point, which is between the wheel wells. Most full-size trucks have over 50 inches here, but mid-size trucks like a Tacoma or Ranger can be tighter. Your Renegade’s 48-inch width needs to fit comfortably.
Measure Length (Tailgate Up): Measure from the inside front of the bed (the bulkhead) to the inside of your closed tailgate.
Measure Length (Tailgate Down): Measure from the bulkhead to the very end of your lowered tailgate. This is your maximum possible length.

Here are the typical real-world numbers:

Long Bed: 8 feet = 96 inches.
Standard/Regular Bed: 6.5 feet = 78 inches.
Short Bed: 5.5 to 5.8 feet = 66 to 70 inches.

Will a Can Am Renegade Fit in a Truck? The Bed-by-Bed Verdict

Now we match the numbers. With a Renegade length of ~86 inches, the answer becomes much clearer. Here are the will a can am renegade fit in a truck tips you’ve been looking for.

Long Bed Trucks (8-Foot / 96 Inches)

Verdict: Yes, almost certainly.

This is your best-case scenario. An 8-foot bed provides 96 inches of space. Your ~86-inch Renegade will fit inside with the tailgate closed, which is the safest and most secure way to transport it. Just ensure your payload capacity can handle the weight.

Standard Bed Trucks (6.5-Foot / 78 Inches)

Verdict: Yes, but with the tailgate down.

This is the most common scenario and where most questions arise. At 78 inches, the bed itself is too short for the Renegade. You will absolutely have to lower the tailgate to make it fit. The rear tires will be resting on, or very close to, the tailgate.

This is generally acceptable, but you must be aware of the weight on your tailgate. Your truck’s tailgate support cables are strong, but they aren’t designed to carry 400+ pounds of bouncing weight for hundreds of miles. Consider investing in a set of tailgate support bars for added security.

Short Bed Trucks (Under 6-Foot / <70 Inches)

Verdict: Not recommended. It’s unsafe.

Do not attempt this. With an 86-inch machine and a bed under 70 inches, a significant portion of the ATV’s weight—including the entire rear axle—will be resting on the tailgate or hanging off behind it. This creates a dangerously unbalanced load, puts immense stress on your tailgate, and negatively affects your truck’s steering and braking.

For short bed owners, a small utility trailer is the only safe and responsible option.

How to Load a Can Am Renegade in a Truck: The Pro-Level Guide

Knowing it fits is half the battle. Now you need to load it without ending up on a YouTube fail compilation. Follow these will a can am renegade fit in a truck best practices to the letter.

Your Essential Loading Gear

Don’t even start without this equipment. No shortcuts.

A Quality Set of Ramps: Get arched aluminum ramps. The arch helps prevent the ATV from “bottoming out” as it transitions from the ramp to the truck bed. Crucially, ensure the ramps have a weight rating that is at least double the weight of your ATV to account for you and dynamic forces.
Ramp Safety Straps: These are non-negotiable. They hook from your ramps to your truck’s receiver hitch or safety chain loops to prevent the ramps from kicking out from under you.
Four Heavy-Duty Ratchet Straps: Don’t use cheap cam buckle straps. You need four separate 1.5-inch or 2-inch ratchet straps with a high working load limit to properly secure a heavy machine like the Renegade.
A Helmet: Seriously. Wear it.

The Step-by-Step Loading Process

Find the Right Spot: Park your truck on level ground. If possible, back up to a small incline or curb to decrease the angle of your ramps, making loading much easier and safer.
Set Your Ramps: Place your ramps on the edge of your tailgate, spaced to match the width of the Renegade’s tires.
SECURE THE RAMPS: Attach your ramp safety straps. Hook one end to the middle of a ramp and the other to a secure point on your truck. Pull them tight. This is the most critical safety step.
Prepare the Renegade: Put the ATV in 4WD Low. This gives you maximum control and torque at a slow speed.
The Ascent: Line up straight with the ramps. Get a little rolling start and apply smooth, steady throttle. Do not gun it. Keep your eyes focused on the center of the truck bed, not down at your tires.
Position in the Bed: Drive slowly forward until the front tires of the Renegade gently touch the front bulkhead of the truck bed.
Shut Down and Secure: Turn off the engine, put the ATV in Park, and engage the parking brake.
Strap It Down: Use the “X” pattern. Attach one strap from the front-right of the truck bed, across to the left side of the ATV’s frame, and tighten. Repeat on the other side. Do the same for the rear. You want to compress the suspension about an inch or two. This prevents the straps from coming loose as the ATV bounces.
The Shake Test: Grab the Renegade’s rack and give it a hard shake in all directions. It should feel like a solid part of the truck. If it moves, your straps aren’t tight enough.

Common Problems and How to Avoid Them

Learning from others’ mistakes is cheaper and less painful. Here are some common problems with will a can am renegade fit in a truck that you need to avoid.

Ignoring Payload Capacity: A 900 lb Renegade, a 200 lb rider, 100 lbs of gear, and two passengers can easily exceed the payload limit of a standard half-ton truck. Check the sticker on your driver’s side door jamb. Overloading is illegal and unsafe.
Using Short, Flimsy Ramps: Using ramps that are too short creates a dangerously steep angle. Using ramps with too low of a weight rating is asking for them to buckle. Spend the money on good, long, high-capacity ramps.
Forgetting to Secure Ramps: We’ll say it a third time. If you don’t secure your ramps, they will slide off the tailgate, and your ATV will come crashing down.
Crashing into Your Rear Window: It happens more than you think. Be gentle on the throttle as you pull to the front of the bed. Some people place a piece of plywood against the bulkhead for extra protection.

Frequently Asked Questions About Hauling Your Renegade

Can I close the tailgate with a Renegade in my truck?

Only if you have an 8-foot long bed. For all standard and short beds, the tailgate will need to remain down.

Is it safe to drive with the ATV’s rear tires on the tailgate?

It is generally safe for short to medium distances, provided the ATV is strapped down exceptionally well and you don’t exceed your truck’s payload. For long-distance hauling, investing in a set of steel tailgate support bars that transfer the weight to the frame is a smart move for your peace of mind and the longevity of your truck.

What about a sustainable will a can am renegade fit in a truck approach?

Great question! An eco-friendly will a can am renegade fit in a truck mindset focuses on safety and efficiency. Properly securing your machine prevents any potential fluid leaks on the roadway. Ensuring your truck’s tires are properly inflated for the added weight improves fuel economy. For very long trips, a lightweight aluminum trailer can sometimes be more efficient as it improves the truck’s handling and aerodynamics compared to a high-profile ATV sticking out of the bed.

This also ties into the will a can am renegade fit in a truck care guide: by not overloading your truck’s suspension and tailgate, you are sustainably extending the life of your vehicle and avoiding costly repairs.

So, the final verdict? Yes, a Can-Am Renegade will fit in many trucks, but not all. It’s a game of numbers. Measure your machine, measure your truck bed, check your payload, and always, always prioritize safety when loading and securing your pride and joy.

Now you have the knowledge. Load it up right, double-check your straps, and get out there.

The trails are waiting. Ride hard, and ride safe.

Author
Recent Posts

Thomas Corle

Founder & Automobile expert at FatBoysOffroad

Automobile expert and off-road enthusiast, sharing in-depth knowledge of vehicles, gear, and adventures. Helping readers make smart decisions and enjoy the thrill of off-roading safely and confidently.